FM-F004 Two-Component Polysiloxane Topcoatcrafted with a High-Grade Polysiloxane Modified Resin Binder, It Serves as a High-Performance Topcoat for Durable Surface Prot

This two-component coating is formulated with a high-grade polysiloxane-modified resin binder, supplemented by imported titanium dioxide, additives, solvents, and other components. The resulting paint film exhibits excellent physical and mechanical properties, as well as outstanding corrosion resistance, humidity and heat resistance, salt spray resistance, gloss retention, color retention, and exceptionally long-term weatherability.

 

Physical Parameter

Construction Instruction

 

Recoat Interval:

Surface treatment:

To ensure long-lasting adhesion of the coating, all surfaces must be clean, dry, and coated with a sound and compatible primer (in compliance with ISO 12944-4, Clause 46.1). If the previous coating has been contaminated, appropriate methods should be selected to remove grease and dust; the diluent of this paint can also be used for wiping clean.

Compatible Coatings

1.Epoxy zinc-rich primer + epoxy mica iron oxide intermediate coat + polysiloxane topcoat.
2.Inorganic zinc-rich primer + epoxy sealer coat + epoxy mica iron oxide intermediate coat + polysiloxane topcoat.

Construction conditions:
Substrate temperature must exceed the dew point by at least 3°C, with relative humidity <85% and wind speed ≤ Level 3.Outdoor applications shall avoid rainy, foggy, or dusty conditions, as well as morning/evening dew formation.Under normal circumstances, the coated surface should not be exposed to rain within 16 hours after application.

Notes:

1.During construction, the paint should be prepared according to the required amount, and the mixed paint must be used up within 5 hours to prevent gelation and waste due to prolonged storage.
2.The tools used for construction should be kept dry and clean, and no impurities such as moisture or grease should be mixed into the coating.

Storage:

1.The product must be stored in tightly sealed containers in a well-ventilated, dry area away from direct sunlight. The recommended storage temperature range is 0-35°C.
2.The product shelf life is 12 months from the date of manufacture. Beyond this period, the product may be retested according to specifications. If compliant, it may continue to be used.

Safety:

1.Use only in well-ventilated areas. Avoid inhalation of mists or vapors. Prevent contact with skin and eyes. In case of eye contact, rinse thoroughly with plenty of water and seek immediate medical attention.
2.When applying in confined or poorly ventilated spaces, mandatory forced ventilation and full protective equipment (respirator, gloves, goggles) must be used.