FD-H001 Zinc Epoxy Primer Coating for Steel Structures: Anti-Corrosion Protection System

FD-H001 two-component epoxy primer for steel substrates.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Hot Sales High-Performance Anti Rust Zinc Epoxy Primer for Steel Buildings

FD-H001 Zinc Epoxy Primer Coating for Steel Structures: Anti-Corrosion Protection System
1. Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxy resinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Highshielding property, superioranti-rustproperty, strongadhesion, and excellent oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2. Surface treatment:
The steel surface is meticulously shot blasted or sand blasted to achieve Sa2.5 level, or manually rust-removed to St3 level for optimal results.

3. Construction conditions:
The substrate temperature must be at least 3°C higher than the dew point, with relative humidity below 85%, and wind force not exceeding level 3. When temperatures dip below 5°C, the epoxy resin and curing agent cease to react, necessitating a halt in construction. Avoid outdoor applications during rainy, foggy, windy, or sandy conditions and during morning and evening times when condensation can occur.

4. Notes:
1. Prior to use, thoroughly mix component A using mechanical stirring, then blend evenly with component B for a consistent mixture.
2. Maintain regular stirring during the coating process to avert sedimentation, which can disrupt the powder to liquid balance and compromise the quality of the paint film.
3. Ensure that the dry film thickness meets or exceeds 70μm, with 1 to 2 coats completed for full protection.
4. Once mixed, the two-component paint should be applied within 5 hours to preserve coating quality. Exceeding this time frame can negatively impact performance.
5. After using the curing agent, seal it tightly and use it promptly to prevent losses from reactions with moisture in the air.