FD-H001 20kg Matt Epoxy Coating - for Brush, Roll, or Spray

FD-H001 two-component epoxy anti-corrosion coating for steel substrates.

Reference price (FOB)

US $2-10 / kg

Quantity	Reference price
100-999 kg	USD 10.00 / kg
1,000-999,999 kg	USD 6.00 / kg
1,000,000+ kg	USD 2.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Factory Price Double Component Epoxy Anti-Corrosive Primer Coating

1. Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxy resinasthebasematerial, augmented with phosphorironpowder,combined with a rust-proofpigment,among other elements, and cured by the durability of polyamide.It isconveniently packed as dual componentsAand B.Characteristics:Highshielding capability, along with superioranti-rusteffectiveness, strongadhesion, and remarkable oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2. Surface Treatment:
The steel surface is meticulously shot blasted or sand blasted to Sa2.5 level, or manually rust-removed to St3 level for optimal adhesion.

3. Construction Conditions:
Ensure the substrate temperature is at least 3°C above the dew point, with relative humidity below 85%, and wind force not exceeding level 3. Note: If substrate temperature falls below 5°C, the epoxy resin and curing agent cease to react, necessitating a halt in construction. Avoid days with rain, fog, strong winds, and sand, as well as times of condensation, for outdoor work.

4. Notes:
1. Before use, thoroughly mix component A with mechanical stirring, followed by a uniform blend with component B.
2. Stir regularly during application to prevent sedimentation, which could imbalance the powder-to-liquid ratio, impacting paint film quality.
3. Achieve a recommended dry film thickness of ≥70μm, with 1 to 2 coats for optimal protection.
4. Use the mixed two-component paint within 5 hours to maintain coating quality; exceeding this time may compromise effectiveness.
5. After utilizing the curing agent, seal it tightly and use promptly to prevent reaction with ambient water vapor that could lead to product loss.