FD-H001 Zinc-Rich Epoxy Anti-Corrosion Primer (Steel)

FD-H001 two-component epoxy primer for steel substrates. Supplied in liquid form.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Color: Grey
Appearance: Liquid
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Trademark: signal
Transport Package: Barrel Package in Pallet
Specification: 35*30
Origin: Dongying China
HS Code: 3208100000
Customization: Available
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Steel Structure Anti-Corrosion Epoxy Zinc Rich Primer Paint

1.Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxyresinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Highshielding property, superioranti-rustproperty, strongadhesion, and good oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2.Surface treatment:
The steel surface is meticulously shot blasted or sand blasted to Sa2.5 level, ensuring optimal preparation, or manually rust-removed to St3 level for surfaces requiring specialized attention.

3.Construction conditions:
Achieve ideal results by ensuring the substrate temperature remains 3°C above the dew point, with a relative humidity of less than 85%, and wind force no greater than level 3. Note, if the substrate temperature is below 5°C, the epoxy resin and curing agent will not react, halting construction. Construction should not proceed on rainy, foggy, windy, or sandy days, nor during morning and evening condensation for outdoor projects.

4.Notes:
1. Prior to application, thoroughly use mechanical stirring to homogenize component A, then combine evenly with component B to ensure perfect integration.
2. Maintain quality by regularly stirring during the application process. This prevents sedimentation and ensures a balanced powder to liquid ratio, thus maintaining the impeccable quality of the paint film.
3. For optimal performance, it is advised that the dry film thickness should be greater than or equal to 70μm, achieved through one to two coats.
4. Utilize the mixed two-component paint within 5 hours for best results. Extending this period could compromise the coating's integrity.
5. Once the curing agent has been opened, ensure it is sealed tightly and used promptly to prevent any deterioration from reactions with atmospheric moisture.