FD-H001 High Pressure Airless Spray Epoxy Zinc Rich Primer Paint 20kg

FD-H001 two-component epoxy primer for steel substrates.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Steel Structure Anti-Corrosion Epoxy Zinc Rich Primer Paint

1.Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxyresinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Highshielding property, superioranti-rustproperty, strongadhesion, and good oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2.Surface treatment:
The steel surface is meticulously prepared by either shot blasting or sand blasting to achieve a Sa2.5 level of cleanliness, or by manual rust-removal to the St3 standard.

3.Construction conditions:
To ensure optimal results, maintain the substrate temperature at least 3°C above the dew point, with a relative humidity of less than 85% and wind force no greater than level 3. If the substrate temperature drops below 5°C, the epoxy resin and curing agent cease to react, necessitating a pause in construction. Be sure to avoid construction under rainy, foggy, or excessively windy and sandy conditions, as well as during times of morning and evening condensation, especially for outdoor projects.

4.Notes:
1. Prior to application, employ mechanical stirring to thoroughly mix component A, then blend it evenly with component B to ensure consistency.
2. Regular stirring throughout the coating process is essential to prevent sedimentation, which can disrupt the powder to liquid balance and compromise the quality of the paint film.
3. To achieve the best protective layer, it is recommended that the dry film thickness be maintained at 70μm or greater, with 1 to 2 coats applied as necessary.
4. After mixing, the two-component paint should ideally be utilized within 5 hours to preserve coating quality. Exceeding this timeframe may lead to diminished quality.
5. Ensure the curing agent is sealed tightly after use and consumed quickly to prevent reaction with moisture in the air, which could cause unwanted losses.