FD-H001 20kg Epoxy Zinc Rich Primer Paint for Brush and Roller Applications

Name: FD-H001 20kg Epoxy Zinc Rich Primer Paint for Brush and Roller Applications
SKU: MIC-QGyYqFuxvoRm

FD-H001 two-component epoxy primer for steel substrates.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Steel Structure Anti-Corrosion Epoxy Zinc Rich Primer Paint

1. Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxy resinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Highshielding property, superioranti-rustproperty, strongadhesion, and good oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2. Surface treatment:
The steel surface is expertly prepared using shot blasting or sand blasting to achieve a pristine Sa2.5 level of cleanliness, or it is meticulously cleaned to a St3 level manually to ensure optimal paint adhesion.

3. Construction conditions:
The substrate temperature must be at least 3°C above the dew point to prevent moisture issues. Maintain a relative humidity below 85% and ensure wind forces do not exceed level 3. If the substrate temperature drops below 5°C, the reaction between the epoxy resin and curing agent halts, necessitating a pause in construction. For outdoor applications, avoid days with rain, fog, strong winds, or sandy conditions, and steer clear of times prone to morning and evening condensation.

4. Notes:
1. Before use, employ mechanical stirring to thoroughly homogenize component A, and subsequently blend it meticulously with component B to ensure uniformity.
2. Continually stir during application to avert sedimentation, which might disrupt the powder-to-liquid ratio and compromise the integrity of the paint film.
3. It is advisable to aim for a dry film thickness of at least 70μm, completing 1 to 2 coats for optimal performance.
4. Once mixed, utilize the two-component paint within 5 hours to maintain coating quality, as exceeding this timeframe may lead to adverse effects.
5. Seal the curing agent tightly after use and employ it promptly, guarding against potential reactions with ambient water vapor that could lead to wastage.