FD-H001 Anti-Rust Protection: Zinc Epoxy Primer for Steel Buildings

Name: FD-H001 Anti-Rust Protection: Zinc Epoxy Primer for Steel Buildings
SKU: MIC-lAgRPpUYFqrr

FD-H001 two-component epoxy primer for steel substrates.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Hot Sales High-Performance Anti Rust Zinc Epoxy Primer for Steel Buildings

FD-H001 Anti-Rust Protection: Zinc Epoxy Primer for Steel Buildings
1.Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxyresinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Exemplaryshielding capability, outstandinganti-rustperformance, excellentadhesion, with superb oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2.Surface treatment:
The steel surface must be prepared through shot blasting or sand blasting to Sa2.5 level, or rust manually removed to St3 level for optimal performance.

3.Construction conditions:
The substrate temperature should exceed the dew point by at least 3°C, with relative humidity below 85%, and wind force no greater than level 3. If the substrate temperature drops below 5°C, the epoxy resin and curing agent will cease to react, halting construction. Avoid outdoor work during rainy, foggy, windy, and sandy conditions, as well as morning and evening condensation.

4.Notes:
1. Prior to application, ensure component A is mechanically stirred to achieve uniformity before combining thoroughly with component B.
2. Maintain regular stirring throughout the coating process to prevent sedimentation, which may disrupt the powder-to-liquid ratio and compromise the quality of the paint film.
3. It is advisable for the dry film thickness to be at least 70μm, completed in 1 to 2 coats.
4. Post-mixing, the two-component paint should ideally be used within 5 hours, as exceeding this duration could impact the coating's quality.
5. Ensure the curing agent container is sealed tightly after use and consumed promptly to avert losses from reactions with moisture in the air.