FD-H001 Heavy-Duty Matt Epoxy Primer Coating - 20kg for Extreme Conditions

Product specifications

Model NO.

FD-H001

Color

Grey

Appearance

Liquid

Main Raw Material

Epoxy

Method

Spray

Level

Primer

Drying Method

Air Drying

Substrate

Steel

Components

Film Forming Matter

Formation Mechanism

Conversion Type

Luster

Matt

Weight

20kg/Barrel

Construction Method

High Pressure Airless Spray, Air Spray, Brush, Rol

Coating Thickness

Wet Film:80um Dry Film: 40um

After Sales Service

5 Years

Trademark

signal

Transport Package

Barrel Package in Pallet

Specification

35*30

Origin

Dongying China

HS Code

3208100000

Customization

Available

Production Capacity

50000ton/Year

Package Size

30.00cm * 30.00cm * 35.00cm

Package Gross Weight

20.000kg

Lead Time

7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)

Number of components

Two-component

Proportion

About 2.40

Dry Time

23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days

Mixing ratio

10:1

Coating thickness

Wet film:80um Dry film: 40um

Construction methord

High pressure airless spray, air spray, brush, roller

Shelf life

12 months

Packaging & shipping

Transport Package

Barrel Package in Pallet

Specification

35*30

Package Size

30.00cm * 30.00cm * 35.00cm

Package Gross Weight

20.000kg

Product description

Product Description

Product Name: Hot Sales High-Performance Anti Rust Zinc Epoxy Primer for Steel Buildings

1. Introduction:

The epoxy zinc-rich primeris a state-of-the-art,_{highly-effective}anti-corrosionsolution,formulated asa top-tiertwo-component_{coating system,}utilizing epoxy resinas the foundationalelement, integrated withphosphor ironpowder, acutting-edge rust-proofpigment, andother key ingredients. The mix iscured usinghigh-quality polyamide.This premium product isconveniently packagedin dual components A and B.Characteristics:Exceptionalshielding properties, providingoutstanding anti-rustcapabilities, robustadhesion, plusexcellent resistance to oil and water.2. Surface Treatment:For optimal performance, the steel surface should beshot or sand-blasted to Sa2.5 standard, ormanually treated to St3.3. Construction Conditions:Ensure the substrate temperature exceeds the dew point by at least 3°C. Maintain relative humidity below 85% and wind force not exceeding level 3. If the substrate temperature dips below 5°C, cease all activity as the epoxy and curing agent will not react. Steer clear of construction during adverse weather conditions like rain, fog, strong winds, or when condensation is likely in the morning or evening.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C   Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um   Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

4. Notes:
1. Thoroughly mix component A using mechanical stirring before combining it with component B.

2. Continuously stir during application to avoid sedimentation, ensuring a balanced powder-to-liquid ratio, which is critical for maintaining paint film integrity.
3. For optimal results, ensure the dry film thickness is at least 70μm, with one to two coats recommended.

4. Consume the mixed two-component paint within five hours, as prolonged exposure could compromise coating quality.
5. After use, seal the curing agent securely and utilize promptly to prevent losses from atmospheric water vapor reactions.