FD-H001 High Adhesion Matt Epoxy Primer Coating - Ideal for Challenging Surfaces

Name: FD-H001 High Adhesion Matt Epoxy Primer Coating - Ideal for Challenging Surfaces
SKU: MIC-mRPUYSVuhwcv

FD-H001 two-component epoxy primer for steel substrates.

Reference price (FOB)

US $4-10 / kg

Quantity	Reference price
100-9,999 kg	USD 10.00 / kg
10,000-999,999 kg	USD 8.00 / kg
1,000,000+ kg	USD 4.00 / kg

Minimum order: 100 kg

Confirm the specification, quantity and shipping terms for your quotation.

Request a Quote

CategoriesAnti-Corrosion Coatings Primers

Product specifications

Model NO.: FD-H001
Main Raw Material: Epoxy
Method: Spray
Level: Primer
Drying Method: Air Drying
Substrate: Steel
Components: Film Forming Matter
Formation Mechanism: Conversion Type
Luster: Matt
Weight: 20kg/Barrel
Construction Method: High Pressure Airless Spray, Air Spray, Brush, Rol
Coating Thickness: Wet Film:80um Dry Film: 40um
After Sales Service: 5 Years
Transport Package: Barrel Package in Pallet
Specification: 35*30
Trademark: signal
Origin: Dongying China
HS Code: 3208100000
Production Capacity: 50000ton/Year
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg
Lead Time: 7 days (1 - 1000 kg) To be negotiated ( > 1000 kg)
Number of components: Two-component
Color: Grey
Proportion: About 2.40
Dry Time: 23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio: 10:1
Coating thickness: Wet film:80um Dry film: 40um
Construction methord: High pressure airless spray, air spray, brush, roller
Shelf life: 12 months

Packaging & shipping

Transport Package: Barrel Package in Pallet
Specification: 35*30
Package Size: 30.00cm * 30.00cm * 35.00cm
Package Gross Weight: 20.000kg

Product description

Product Description

Product Name: Hot Sales High-Performance Anti Rust Zinc Epoxy Primer for Steel Buildings

FD-H001 High Adhesion Matt Epoxy Primer Coating - Ideal for Challenging Surfaces
1.Introduction:

Epoxyzinc_-richprimerisatwo_-componentcoatingwithepoxyresinasthebasematerial, phosphorironpowder,rust-proofpigment,etc., and cured by polyamide.It ispacked by dual componentsAand B.Characteristics:Highshielding property, superioranti-rustproperty, strongadhesion, and good oilandwaterresistance.

Number of components	Two-component
Color	Grey
Proportion	About 2.40
Dry Time	23±2°C Surface dry time ≤30min, Through dry time ≤24h, Fully cured 7 days
Mixing ratio	10:1
Coating thickness	Wet film:80um Dry film: 40um
Construction methord	High pressure airless spray, air spray, brush, roller
Shelf life	12 months

2.Surface treatment:
The steel surface is meticulously prepared through shot blasting or sand blasting to Sa2.5 level, ensuring it is meticulously cleaned of rust, or by manual rust removal to St3 level.

3.Construction conditions:
Optimal application conditions include a substrate temperature that surpasses the dew point by at least 3°C, with humidity maintained below 85%, and wind force at or below level 3. If temperatures fall below 5°C, postpone application, as the epoxy resin and curing agent halt reaction. Refrain from construction during rainy, foggy, windy, or sandy conditions, as well as during condensation periods in mornings and evenings for exterior applications.

4.Notes:
1. Prior to application, initiate mechanical stirring to ensure component A is uniformly mixed, then integrate thoroughly with component B.
2. Maintain consistent stirring throughout the application to avert sedimentation, which can lead to a disparity in the powder-to-liquid ratio, compromising the integrity of the paint film.
3. It is advised that a minimum dry film thickness of ≥70μm be achieved, with 1 to 2 coats completed for optimal protection.
4. The two-component paint should ideally be consumed within 5 hours post-mixing to maintain coating excellence. Extended time may degrade quality.
5. After the curing agent is opened, ensure it is securely sealed and utilized promptly to prevent potential losses from reactions with atmospheric moisture.