FM-S001 Two-Component Various Colors High Gloss Acrylic Polyurethane Topcoat Anticorrosive Coating

This two-component ambient-curing coating is formulated with hydroxy acrylic resin and aliphatic polyurethane curing agent as the base materials, and trimerized isocyanate as the curing agent. It also incorporates pigments, fillers, solvents, and additives. The resulting paint film is tough, exhibits excellent fullness and high gloss, providing superior protective and decorative effects. Additionally, it demonstrates favorable physical and mechanical properties, as well as resistance to humidity and heat, salt spray, color and gloss retention, and weatherability.

 

Physical Parameter

Construction Instruction

 

Recoating Interval

Surface treatment:

If the previous coating layer has been contaminated, appropriate methods should be selected to remove grease and dust. Alternatively, the diluent of this paint can also be used for wiping clean.

Compatible Coatings

Epoxy zinc-rich primer, inorganic zinc-rich primer, epoxy micaceous iron oxide antirust paint, etc.

Construction conditions:
Substrate temperature must exceed the dew point by at least 3°C, with relative humidity <85% and wind speed ≤ Level 3.Outdoor applications shall avoid rainy, foggy, or dusty conditions, as well as morning/evening dew formation.Under normal circumstances, the coated surface should not be exposed to rain within 16 hours after application.

Notes:

1.During construction, the paint should be prepared according to the required amount, and the mixed paint must be used up within 5 hours to prevent gelation and waste due to prolonged storage.
2.The tools used for construction should be kept dry and clean, and no impurities such as water, banana oil, alcohol-based solvents, or gasoline should be mixed into the paint.
3.After use, the curing agent container must be tightly sealed and used up as soon as possible to prevent losses caused by reactions with moisture or other substances in the air.

Storage:

1.The product must be stored in tightly sealed containers in a well-ventilated, dry area away from direct sunlight. The recommended storage temperature range is 0-35°C.
2.The product shelf life is 12 months from the date of manufacture. Beyond this period, the product may be retested according to specifications. If compliant, it may continue to be used.

Safety:

1.Use only in well-ventilated areas. Avoid inhalation of mists or vapors. Prevent contact with skin and eyes. In case of eye contact, rinse thoroughly with plenty of water and seek immediate medical attention.
2.When applying in confined or poorly ventilated spaces, mandatory forced ventilation and full protective equipment (respirator, gloves, goggles) must be used.