Decorative Stain Resistance Elastic Textured Building Coating for Exterior Wall

Construction Instructions

1. Base Layer Instructions

1.1 Before base layer treatment, the wall needs a certain curing period. Generally, new cement walls require 28 days of curing in winter and 14 days in summer.
1.2 Before applying putty, thoroughly remove loose, peeling, hollow, or powdery base layers, then eliminate dirt such as dust and oil.
1.3 After the first full putty application, use a trowel to smooth it. After slightly drying (generally 3-4 hours), apply the second layer of putty. Once the putty is dry, sand it carefully with sandpaper to remove trowel marks and joints.
1.4 The flatness of the putty surface should be ≤1.5mm.

2. Construction Specifications

2.1 Stir well before construction.
2.2 Roller coating: Fully absorb the coating with the textured roller before applying it evenly until a uniform and three-dimensional textured effect is achieved.

3. Precautions

3.1 Read the construction instructions carefully before starting.
3.2 Do not construct when the temperature is below 5ºC, wind force exceeds grade 4, or in rain, snow, or when the wall temperature exceeds 50ºC.
3.3 Store in a cool, clean, dry place at 0-35ºC. Use the product promptly after opening. (Note: Product performance and construction parameters are obtained under laboratory conditions, but actual usage conditions vary. The company reserves the right to revise the product instructions without prior notice.)

Construction Methods and Procedures